Product Ideas & Requests

The application doesn't start under Windows Server, as it by default lacks the wifi service (can be installed optionally). This should be detected by CAM, and the DLL load should be avoided.

'3DMARK' will generate a bug with CAM, resulting in an instant prompt of "software prevents reading hardware information" in CAM. If restart computer, it becomes "device loading". Only clear the coms can solve this problem

when i see gpu temperature it always show NA pls help me gpu : intel uhd cpu : intel i5 device manufacture : hp motherboard : hp

CAM is causing my NZXT X63 AIO to make really loud noises whenever I open up CAM. I uninstalled CAM, turned my computer off, and unplugged the AIO and the problem went away. I then reinstalled CAM after 30 minutes with no issues, and it started ha...

I've noticed over the past few months that the pump on my X63 rattles. I've found that CAM is causing the pump to act this way. I found this by having CAM run like normal, disconnected and reconnected the USB cable going into the pump - upon recon...

I have 6 nzxt rgb fan + 2 controller + usb multiplier+ couple of nzxt led instaled to my pc. There is no problem about ligthing or other stufs. But when nzxt cam software is on, couple of hours later gpu usage is becoming -1 and computer not answe...

Could you be so kind and give me an advice, what mean code 2 ? Why i cannot intall the app ?

The NZXT N7 Z590 is not working correctly within CAM ("Gerät wird geladen" / "Device is beeing loaded"). BIOS has been updated to 1.20. It had been detected before. I cannot say if the BIOS update is responsible. The Error is permanent and reprodu...

I was writing to you few month ago about this, pinpointed the reason GPU usage is not showing in NZXT CAM. I am deeply dissapointed that it is still not resolved, even I told you the exact reason of the issue. When you enable Hardware Accelerated ...

Sop many times the lighting stops working in the software and I used to be able to fix it in device manager but cant now.