the new update of NZXT CAM is really horrible , my pc used to idle at 29-35c degrees and now it’s around 45-51c , fans aren’t responding as quick or act like how they used to be before the update to cool down the system fast , I see my temps goes around 81c when my pc is under pressure “ using i9 13900k” it only occurred with the recent update never before , even when my pc is warm the fans still quite , tried to change the fan curve so they would start spinning and work as they used to but it was a no go , please fix the app it’s cause a serious issue , let’s not forget about the wrong readings too!! It shows the pc is 10-15c cooler than what it’s actually is.
Guest
Simple fix, just give us the option to select package or core temp in settings. I honestly don't care what the package temp is, cores give a much more stable fan ramp and structure.
Hello Cristian,
I am from Romania too, thx for your drive link.Can you please tell me how to block nzxt acces ? i tried all but i cant block the autoupdate future.Also in my router i cant find anywhere where to block .Thank you very much
I'M HERE TO HELP EVERYONE , i'll post a link so you can download an older version befor this crap update so everyone can reinstall it.Before you start , uninstall this version , disconect from internet , install this offline installer , than block NZXT in windows firewall (incoming and outgoing connection) so it can't autoupdate. than connect back the internet. GOOD LUCK.
(https://drive.google.com/file/d/1oXsQzTH0cg1ydKw1ND2XTu7oZf5hX-cS/view?usp=drive_link)
I'm having the same issue on my 13900k use to idle at 30-35c now its idling at 40-50c Like this needs to be fixed bout to go back to corsair
Im having the same issue temperatures fluctuating every 3 seconds 10-15c its annoying i jsut set everything up how i want and just quit the cam software, i use lian li infinite fans so i jsut use the software for that and guess what no fluctuation, the only fans i use by nzxt is my top fans on my pc the rest is lian li. please sort out your cam software nzxt as your previous update was fine.
They are avoiding the problem, let us revert back! I have to run on performance mode to play anything now, use to work just fine on silent mode
Any Fix Yet? :c
I have the same issue
Any way to rollback to previous version?
WTF!!!
Still no comment? HELLO NZXT....ARE YOU HERE?
It must be a joke or i´m fallin actually in the rabbit hole :-(
SO GUYS, PLEASE STOP BUYING ANYTHING FROM THIS MANUFACTURE!
It´s a nightmare!!!
This Update is terrible. All the Measurements from the Fan´s are no longer existing. Your Software says RPM = 0. Perfect condition for an dynamic leveling of the RPM and a temperature controlling. The MSI Center is functioning exactly so i have the direct comparison. Hurry Up folks - time is running for switching to a better product.
This new update is terrible I can't even play a game without my CPU overheating 13900ks. Every game crashes. The old version was perfect. I can't even run 3dmark without it crashing
same here fans acting up and lights stay on violent is is getting high and then shuts off
Is this going to get fixed or what? I am about to buy all new AIO and fans before I destroy my rig. Ridiculous. .. Just put the download for the prior version out at least....
Hello NZXT,
No need to hurry anymore for me. Hooked up an old iCue commander and fans are behaving as they should now.
Good job in helping out the competition 👍
Hi
I have the same issue
Any official way to rollback to previous version?
Regards
Guys,for the reason that NZXT Team give no response to our posts by reddit and this Forum
I suggest you to write new tag and start mainstream to help ourselves. Write #NZXTFIXCAM in all social networks to produce fastest fix for our software. Love for all and wishing to be more pacient! <3
Same problem here, temperature is idle 51c now, I know it is because of CPU package reading now...but it sucks. Also temp spikes between 40 and then all of a sudden 55, fans and pump start and stop like crazy even though I fixed the curves..everything was good before this update....please fix quickly.
I'M HERE TO HELP EVERYONE , i'll post a link so you can download an older version befor this crap update so everyone can reinstall it.Before you start , uninstall this version , disconect from internet , install this offline installer , than block NZXT in windows firewall (incoming and outgoing connection) so it can't autoupdate. than connect back the internet. GOOD LUCK.
(https://drive.google.com/file/d/1oXsQzTH0cg1ydKw1ND2XTu7oZf5hX-cS/view?usp=drive_link)
Yup. This new update is awful
Hello NZXT!
What´s going on here?
So many comments about an horrible Update and still no reaction?
WE NEED A FIX FOR THAT! ASAP!!!