Product Ideas & Requests

I've noticed over the past few months that the pump on my X63 rattles. I've found that CAM is causing the pump to act this way. I found this by having CAM run like normal, disconnected and reconnected the USB cable going into the pump - upon recon...

I have 6 nzxt rgb fan + 2 controller + usb multiplier+ couple of nzxt led instaled to my pc. There is no problem about ligthing or other stufs. But when nzxt cam software is on, couple of hours later gpu usage is becoming -1 and computer not answe...

In NZXT CAM you can set the aio fans curve to follow the liquid temperature, since the liquid usually has very little temperature oscillations it would be useful to be able to edit the curve degree by degree instead of editing it in 5 degrees steps

It keeps saying failed download error code 3221226356

Hi Guys, I get Error 403 when trying to install, windows 11. Can anyone help?

Correct reproduction of the temperature is very important for proper adjustment of the cooling system (pumps, fans).in multi-core processors, it is necessary to focus on the peak value of the hottest core! not on average!!! can it be fixed? I've b...

This would be a useful power-saving setting that can be turned on optionally. Have a setting in NZXT CAM to turn off all NZXT lighting when system has been inactive for an amount of time. This would be useful to save power if a system has been run...

I was sitting here the other evening staring at my Kraken ring spinning in Marquee mode, and it struck me that it would be very cool if the speed of CAM lighting animations could be dynamically varied according to either CPU or GPU load. CAM alrea...

can you make the dual info temp other way like cpu up and the gpu down on the kraken 240/280 aio.. it is also nicer because the gpu is down and cpu is up in a pc case

cheap aio pls