Product Ideas & Requests

I had recently bought a Starter Pro PC from NZXT about a month or so, and it has been working fine for me. However, at the time of me typing this, only the GPU fans for my GeForce RTX 2060 show up with "0 RPM", even though they are working correct...

CAM software uses almost 1GB of ram and keeps spiking to 30-40% CPU usage every few seconds. Using a Kraken Z73

There is a problem with the pump and fan speeds dropping. The pump speed periodically drops from 2800 RPM to 2000RPM. The fan speed also does from 2000 RPM to 1600RPM, eventhough the temperature reamins the same. Im using Kraken X72 and controllin...

Please complete delete monitoring function, it is incompatible with Asus Rog strix 3090 and make my gpu coil whine!!!!!!!!!

Temp. readings are not accurate.

After trying to see if it was air bubbles, I later learned that the rattling starts after CAM opens. It will not stop until all power to the PC is reset. Would be great to be able to customize RGB without hearing a constant tapping from the pump.

everytime i minimize the cam software it freezes the temp reading on the lcd screen. it reads the correct temps on the overlay but not on the lcd screen. not until i click on the window and put it back up, does it start reading the temp again. so ...

This stupid feature just causes your mechanical hard drives to incessantly click, probably causing unneeded degradation.

So, every time I open up the cam app, it red-downloads cam to open it. The only application you guys give me to click on is setup. After you download it, there is no app that can be made that can open cam. I had 300 versions of cam after all the t...

GPU usage isnt showing in latest version